1
Discussion - Software / Re: How do I configure FT232H device for I2C interface using FT_PROG
« on: October 25, 2020, 08:01:27 AM »
Hi,
Thanks for the quick reply.
I've downloaded the libMPSSE from the link below. I've run the executable (static and dynamic library) and it work fine now (I saw correct signals on the Logic).
But, I prefer using existing serial communication tool (such as Tera-Term or Docklight) over building software using Example/libraries.
Could you recommend me other FTDI USB COM Port - I2C cable which could be used with existing Serial communication tool?
Thanks,
Itamar
Thanks for the quick reply.
I've downloaded the libMPSSE from the link below. I've run the executable (static and dynamic library) and it work fine now (I saw correct signals on the Logic).
But, I prefer using existing serial communication tool (such as Tera-Term or Docklight) over building software using Example/libraries.
Could you recommend me other FTDI USB COM Port - I2C cable which could be used with existing Serial communication tool?
Thanks,
Itamar