1
Discussion - Software / Utility to capture data/byte stream from FT232H device.
« on: November 29, 2022, 10:16:45 AM »
Hi
I hope this is the correct sub forum for this post.
I plan to use a FT232H device with an FPGA as source of data as described in this application note. See figure 2.1
https://ftdichip.com/wp-content/uploads/2020/08/TN_167_FIFO_Basics.pdf
I want to stream data from the FPGA to a windows PC and capture it to a file. The data stream will be quite fast ~ 140 kilobytes per second.
My question.
Does FTDI provide a utility that capture to file a data (byte stream) coming in on USB? I did look on this page but could not really find something. https://ftdichip.com/utilities/
Or is there a third party free or paid for utility that someone can prescribe?
I would like to post process the captured stream of data after recording it for say 10 or 20 seconds.
Thanks for your help
Burpee.
I hope this is the correct sub forum for this post.
I plan to use a FT232H device with an FPGA as source of data as described in this application note. See figure 2.1
https://ftdichip.com/wp-content/uploads/2020/08/TN_167_FIFO_Basics.pdf
I want to stream data from the FPGA to a windows PC and capture it to a file. The data stream will be quite fast ~ 140 kilobytes per second.
My question.
Does FTDI provide a utility that capture to file a data (byte stream) coming in on USB? I did look on this page but could not really find something. https://ftdichip.com/utilities/
Or is there a third party free or paid for utility that someone can prescribe?
I would like to post process the captured stream of data after recording it for say 10 or 20 seconds.
Thanks for your help
Burpee.