Hello,
What hardware are you using exactly?
What software are you using and what is the error message?
We have no knowledge of ECMSpy.
If it's not one of our products, although it utilises our device, I am unable to support it.
Product Manufacturers are responsible for supporting end-users of their products.
FTDI cannot control how the USB ICs are used and often has no knowledge of the entire product.
Please see the following document for reference:
http://www.ftdichip.com/Support/Documents/TechnicalNotes/TN_102_OEM_Technical_Support_Requirements_for_FTDI_Products.pdfIf the product uses our standard driver (note that it may use custom drivers), usually windows will automatically find and install the driver if you are connected to the internet. Simply plug the device into the PC.
However, you can use the
setup executable found on our
website.
Note: you may need to save to PC, right-click and select run as administrator.
This will install the drivers on your PC with licensing information, so next time you plug in the device the device should be enumerated with those drivers.
Also, we cannot support any virtual type OS. There can be all sorts of problems that are out of our control.
You can find our supported drivers here:
http://www.ftdichip.com/FTDrivers.htm If your target OS is Windows or Linux, please use it directly on that OS without any virtual machine.
Best Regards,
FTDI Community