FTDI Community
General Category => Discussion - Software => Topic started by: G40 on September 23, 2019, 12:45:42 PM
-
Hello,
Attempting to 'scan and parse' when using 'Prog' simply crashes on Windows 10.
The issue was previously raised here https://www.ftdicommunity.com/index.php?topic=39.msg698#msg698 (https://www.ftdicommunity.com/index.php?topic=39.msg698#msg698) and remains unsolved.
Can anyone advise please?
-
Hello,
This issue is caused by other HID class devices connected to the PC.
Did you try disconnecting everything (apart from mouse/keyboard)?
I have a beta for you to try to resolve the issue:
FT_Prog_v0.0.94.440 Installer.zip (ftp://u45902898-ide:Ftd1$erv@ftp.ftdichip.com/CES/FT_Prog_v0.0.94.440%20Installer.zip)
Can you please test this out and give us any feedback?
Thanks,
FTDI Community
-
Looks like a major improvement. Finds all of the connected FTDI devices and no longer crashes when any number of NXP dev. boards are connected.
Much appreciated, thank you.
-
Hello,
This issue is caused by other HID class devices connected to the PC.
Did you try disconnecting everything (apart from mouse/keyboard)?
I have a beta for you to try to resolve the issue:
FT_Prog_v0.0.94.440 Installer.zip (ftp://u45902898-ide:Ftd1$erv@ftp.ftdichip.com/CES/FT_Prog_v0.0.94.440%20Installer.zip)
Can you please test this out and give us any feedback?
Thanks,
FTDI Community
This fixed the issue for me on Windows 10 64bit