Hello,

Are you using the device and an SPI master or slave?

You could refer to the software examples as part of the LibFT4222 download:

.\LibFT4222-v1.4\samples\

There is also UMFT4222EV available for test and development.

Best Regards,
FTDI Community

Hello,

We advise to use the -a switch instead as shown below.

fnt_cvt.exe -i consola.ttf -s 29 -a -c setfont2

We tested this with the same consola font file and it works well.

Best Regards,
FTDI Community

Hi Anton,

Could you please check whether the board is connected to a USB2 or USB3 port when doing the programming?

The utility requires a USB3 port in order to program the device and the error from a USB2 port looks the same as the one you mentioned here.

The board can be recovered by connecting to a USB3 port and repeating the programming and should then show up correctly programmed with your new settings.

Best Regards
FTDI Community

Hello,

All our software examples use the 8051 Digital I/O ports P1 and P3 or Analog I/O ports P0 and P2. The pull up/downs are only relevant to the pins when they are inputs, and like the 8051 the pins are open drain when set as outputs.

Also note that traditional 8051 Port 0 (P0) is open-collector, unlike the other ports (P1 to P3).
This means that an external pull-up is required when using P0 as GPIO for example.

Thanks,
FTDI Community

Hi,

Please follow the steps outlined in the Driver Uninstallation procedure which will remove and reinstall all FTDI drivers from your machine:
FTDI_Driver_Uninstall_with_2-12-28_Install.pdf

If you are still having problems after following these steps please can you contact support1@ftdichip.com with full details of your problem and a copy of your schematic so that we may review it, quoting this forum topic.

Thanks,
FTDI Community

Some of our customers are having problems with Driver Reseller Rights for our submission ID 1152921504627044695.
 
When they open the .hlkx files in HLK Studio, the following error appears:

"Package (Shell_1152921504627044695.hlkx) with a version (3.4.0.0) is not compatible with this instance of PackageManager.  This instance of Package Manager accepts versions 3.3.0.0, 2.0.0.0, 3.1.0.0, 3.2.0.0"

This appears to be a problem with the latest version of HLK Studio version 1703:

https://developer.microsoft.com/en-us/windows/hardware/windows-hardware-lab-kit

If you download 'Get the HLK Insider Preview' at the link above, the issue is resolved with this preview version.
Note: You need to be a member of the Windows Insider program to download this preview version.

Microsoft plan to release this updated version of HLK Studio.

Thanks,
FTDI Community

The user can create 32bit or 64bit dynamic or statically linked projects using the D2XX drivers.

Read more in TN_153 Instructions on Including the D2XX Driver in a Visual Studio Express 2013 Project

The necessary driver files can be downloaded here:

D2XX Drivers

Note: The current free version of Visual Studio is Visual Studio Community 2017.
It allows you to use for 30 days without a Microsoft account. However, after this period it asks you to sign in. You can create a free Microsoft account which will allow you to continue to use Visual Studio for free.

The following simple code can be used as a test:

#include "stdafx.h"
#include <windows.h>
#include "ftd2xx.h"
int main()
{
FT_HANDLE ftHandle;
FT_STATUS ftStatus;
ftStatus = FT_Open(0, &ftHandle);
ftStatus |= FT_SetUSBParameters(ftHandle, 4096, 4096); // Set USB transfer sizes
ftStatus |= FT_SetChars(ftHandle, false, 0, false, 0); // Disable event characters
ftStatus |= FT_SetTimeouts(ftHandle, 5000, 5000); // Set read/write timeouts to 5 sec
ftStatus |= FT_SetLatencyTimer(ftHandle, 16); // Latency timer at default 16ms
ftStatus |= FT_SetFlowControl(ftHandle, FT_FLOW_NONE, 0x11, 0x13); // No flow control
ftStatus |= FT_SetBaudRate(ftHandle, 9600); // Baud rate = 9600
ftStatus |= FT_SetDataCharacteristics(ftHandle, FT_BITS_8, FT_STOP_BITS_1,
FT_PARITY_NONE);
if (ftStatus != FT_OK) printf("ftStatus not ok %d\n", ftStatus); //check for error
else
{
char data_out[12] = "Hello World";
DWORD w_data_len = 12;
DWORD data_written;
ftStatus = FT_Write(ftHandle, data_out, w_data_len, &data_written);
char data_in[12];
DWORD r_data_len = 12;
DWORD data_read;
ftStatus = FT_Read(ftHandle, data_in, r_data_len, &data_read);
if (ftStatus != FT_OK)
printf("ftStatus not ok %d\n", ftStatus);
else
printf("Data Read: %s\n", data_in);
}
ftStatus = FT_Close(ftHandle);
printf("Press Return To End Program");
getchar();
return 0;
}