1
Discussion - Software / Re: Display full screen jpg images without rolling effect - FT813
« on: September 16, 2019, 01:04:42 PM »
Hi,
Back to the suggestion about checking decompressed data, I'm trying to get these values, and this command is not working. I get correct width and height values but the size is always 0.
I'm using this library:
https://github.com/RudolphRiedel/FT800-FT813/blob/4.x/EVE_commands.c
And checked the command implementation and it looks fine. The user manual says that it is RAM_G address of the image and this is true - I'm loading the image to the address 0, but how to check end address?
Any suggestion?
BR,
Marcin.
Back to the suggestion about checking decompressed data, I'm trying to get these values, and this command is not working. I get correct width and height values but the size is always 0.
I'm using this library:
https://github.com/RudolphRiedel/FT800-FT813/blob/4.x/EVE_commands.c
And checked the command implementation and it looks fine. The user manual says that it is RAM_G address of the image and this is true - I'm loading the image to the address 0, but how to check end address?
Any suggestion?
BR,
Marcin.