Hello,
It sounds like you have corrupted the project with the changes that you have made.
It might be worthwhile re-downloading the project and starting again and taking care with each change you make.
You could also start with a new project in Eclipse and add your own code/structure. See section 3.1 Creating a new project in
AN_325 FT9xx Toolchain Installation Guide.
AN_398 was never released. Instead the information is included in section 2.34 Datalogger Feature of
AN_365 FT9xx API Programmers Manual.
AN_415 Ethernet to GPIO does indeed use the datalogger feature to store information in EEPROM.
Webpage images could be stored on the SD Card to reduce space or the webpage images could be removed for test purposes.
the Ethernet stack lwip is most likely taking up a lot of space. There should be more information online about reducing this size. The alternative would be to develop your own Ethernet stack.
Note the Bridgetek Community is now open.
We have created the Bridgetek Community to discuss all Bridgetek products e.g. EVE, MCU.
Please follow this link and create a new user account to get started.
Bridgetek CommunityBest Regards,
FTDI Community