FTDI Community
General Category => Discussion - Software => Topic started by: dbell on March 24, 2019, 03:28:34 am
-
Our new FPGA is designed to send a continuous test pattern to FT601, which sends by USB to Windows 10 “FT600 Data Streamer” app.
“FT600 Data Streamer” GUI output…
Device at Index
Warning: Device is connected using USB 2 cable and/or through a USB 2 host controller!
Device Firmware Version: 0109!
D3XX Driver Version: 01030002 | D3XX Library Version: 01020006!
ERROR: Device can be opened but basic streaming failed!
DRIVER
FTDI FT601 USB 3.0 Bridge Device
version 1.3.0.2
HOST
Windows 10
Visual Studio 2017
-
Hello,
I see that you are using either a USB 2.0 cable or USB 2.0 host. Can you try connecting to a USB 3.0 Host with a USB 3.0 cable to see if that makes any difference?
If you are still having problem please contact support1@ftdichip with a screenshot of your Configurator, so that we may review your setting and details of your FPGA.
Regards,
FTDI Community