FTDI Community

General Category => Discussion - Software => Topic started by: dbell on March 18, 2019, 04:45:42 PM

Title: need to receive data stream from FT602 for non-video purpose
Post by: dbell on March 18, 2019, 04:45:42 PM

We need receive data stream within the UVC from our FT602 to our C#/C++ app on Windows 10.

 Does FT602 have a USB 3 interface for host, or is only UVC available? 

BACKGROUND...
We are using for non-video data stream.

Title: Re: need to receive data stream from FT602 for non-video purpose
Post by: FTDI Community on March 20, 2019, 02:02:41 PM

Hello,

The FT602 UVC Class SuperSpeed USB Bridge device provides a 32 bit parallel interface to application hardware and a UVC class USB port, allowing captured data to be transferred. The 32-bit parallel FIFO interface is for data streaming and there is a UART interface for control path configuration. Typical applications for the FT602 would be a USB 3.1 Digital Video Camera Interface or USB 3.1 Digital Camera.

Note that we have other SuperSpeed USB 3.0 solutions - The FT600 (16-bit FIFO Bus) and FT601 (32-bit wide parallel FIFO interface) supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.

If you want to send an email to support1@ftdichip.com I can provide some additional information.

Regards,
FTDI Community