FTDI Community

General Category => Discussion - Software => Topic started by: jeffdef on December 16, 2019, 08:15:39 PM

Title: VNC2 bridge 2 CDC slaves
Post by: jeffdef on December 16, 2019, 08:15:39 PM

I want to bridge 2 CDC slaves with the VNC2 but I don't see any examples using 2 host ports in the examples provided.  Is this possible and is there already an example project made for this?  I only need to connect to my own CDC slave devices but the USB configuration on the slave may not be detected by the CDC driver from FTDI.  It is a composite device with 2 CDC ports and 1 HID port and all interfaces work fine on PCs.  I want to bridge only the second CDC port.  Is it possible to hard code the CDC info like EP/interface numbers so the driver doesn't have to parse the USB descriptors?

Title: Re: VNC2 bridge 2 CDC slaves
Post by: FTDI Community on December 17, 2019, 02:59:39 PM

Hello,

I noticed we are currently dealing with your questions via Email, please feel free to post any resolution here.

Best Regards,
FTDI  Community