FTDI Community

General Category => New Member Introductions => Topic started by: doctorwho8 on July 20, 2020, 02:16:43 PM

Title: Hello from the US
Post by: doctorwho8 on July 20, 2020, 02:16:43 PM

Hello!
Gregg Levine here. I'm based in NYC. And I use the FTDI parts in connecting either to legacy hardware who have RS232 connectors. For example some Parallax boards use that method. And they sell adapters which contain FTDI part numbers. Some Parallax boards also contain FTDI part numbers for directly connecting to Parallax branded hardware. I also use FT232 ones in a breakout board style made up by Sparkfun for that purpose. In that case I have a few questions coming up concerning the Dot-Net wrapper DLL.
I also use the same family in communicating with certain members of the Arduino community. Typically using adapters designed to attach to a set of matching posts on that board. I first found out about the family of parts in a magazine about the time the original site went up. 

Title: Re: Hello from the US
Post by: FTDI Community Admin on August 11, 2020, 09:13:28 AM

Welcome to the Community.

We will be very interesed to hear further details of your FTDI projects.

best regards

FTDI Community