FTDI Community

Please login or register.

Login with username, password and session length.
Advanced Search  

News:

Welcome to the FTDI Community!

Please read our Welcome Note

Technical Support enquires
please contact the team
@ FTDI Support


New Bridgetek Community is now open

Please note that we have created the Bridgetek Community to discuss all Bridgetek products e.g. EVE, MCU.

Please follow this link and create a new user account to get started.

Bridgetek Community

Show Posts

You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.

Topics - MF3

Pages: [1]
1
General Discussion / FT232H not seen by Windows 10
« on: April 26, 2021, 11:35:38 AM »
Hello community!

I have an issue with FT232H. It's used as USB-232 interface and lately we started to have problems on Windows 10 machines: the device is totally not detected (no "usb inserted sound", no changes in Device Manager, no device detected in FT-Prog). The only sign that the converter is plugged in can be found in USBView, where, if continuously refreshing, sometimes a "USB Streaming" appears in the position where the converter is plugged. Unfortunately all the parameters of this random popping device are zero, so it's not very useful.

On the other hand, on a Windows 7 machine, the device is correctly detected by Windows and all the other applications. One thing i noticed is the FT232H converter could not be programmed, FT-Prog says something like "Can't program, device removed?".
[EDIT] Opening the device I saw the EEPROM was not implemented, so the FT232H runs its default mode.

Usb descriptors change in a coherent way (being it a different chip) aside, maybe, from power demand, where FT232BL presents itself as bus/self powered with 90mA and FT232H as bus powered with 500mA. But maybe it's right!

I also saw that the info in FT-Prog were different from those in USBView (e.g. the descriptor string of FT232H on FT-Prog is "USB <-> SERIAL" where in USBView and in Devices/Printers is "SINGLE RS232-HS".

Can someone give me some pointers about this problem?
Thank you in advance, have a nice day!

MF3

Pages: [1]