Show Posts

You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.

Messages - mikemoy

Pages: [1]

Discussion - Software / VNCII Host Keyboard

« on: April 05, 2022, 08:16:47 PM »

I have a USB keyboard connected to my V2DIP1-32 development module.
Running the USBHostHIDKbd example. Its reading the keys just fine. But the 3 leds on the keyboard don't work.
I.E. Caps Lock.

Is something not configured correctly, or do I need to tell the keyboard to turn on the led? If so, how do I do that ?

thanks

Discussion - Software / VNCII Software examples for Microcontroller via SPI

« on: April 04, 2022, 07:40:11 PM »

Hi guys, new to using this V2DIP1-48 dev board.
I was able to find examples that get loaded onto the device here:
https://ftdichip.com/firmware/precompiled/

I was not able to find any sample code for the micros end to communicate with the VNC2-32L1C IC via SPI.

If there is would someone pleas be kind enough to point me in the right direction. If there is no, there must be documentation to explain whet to send it and how to receive from it.

Thank you!

General Discussion / Re: Widora_NEO: FT232H control signal for TFT Display

« on: December 29, 2017, 10:34:13 PM »

I have a similar setup on the bench, but using the FT2232H, I have a FT232 breakout board that I can throw in and try. What is your pinout from FT232 to LCD ?

Discussion - Software / MCU Host Bus mode Example

« on: December 24, 2017, 11:41:57 PM »

We would like to use the FT2232 in host bus mode. We need to connect an 8-bit device to it. We need the 8data bits, WR, CS, & RD signals.
The only thing I was able to find is some old AP note for a Delphi project. Who uses Delphi ?
Why are there no C/C++ complete examples for this mode ?