FTDI Community

Please login or register.

Login with username, password and session length.
Advanced Search  

News:



Welcome to the FTDI Community!

Please read our Welcome Note

Technical Support enquires
please contact the team
@ FTDI Support


Author Topic: Trouble on USB with another USB serial device on driver level  (Read 294 times)

JonnyFischer

  • Newbie
  • *
  • Posts: 3
    • View Profile

I do use a FT2232H with the driver from CDM21228_Setup. It is used for a SPI connection to some target.

Next to this I do use an STM32-H405 for a special single wire connection.

Both drivers are installed and always shown as working on driver level in windows device manager.

I did use the STM32-H405 first for a test sequence without any problem. The USB-Description is shown in STMicroelectronics Virtual COM Port -  com6.txt as given by USBTreeView.  I did use the FT2232H Interface with another Windows application for some testing. After usage of this connection, the connection on the other interface via STM32-H405 is broken and locks completely for the application. The USB-Description for the interface is changed to what is shown in STMicroelectronics Virtual COM Port -  com6 - 2.txt.

The USB-Description of USBTreeView for the FT2232H stays nearly the same before and after the run as shown in USB-Verbundgerät -com7,com8.txt and is still usable for another test.
Logged