FTDI Community

Please login or register.

Login with username, password and session length.
Advanced Search  

News:

Welcome to the FTDI Community!

Please read our Welcome Note

Technical Support enquires
please contact the team
@ FTDI Support


New Bridgetek Community is now open

Please note that we have created the Bridgetek Community to discuss all Bridgetek products e.g. EVE, MCU.

Please follow this link and create a new user account to get started.

Bridgetek Community

Author Topic: SPI mode clock duty cycle  (Read 1486 times)

pejvaak

  • Newbie
  • *
  • Posts: 1
    • View Profile
SPI mode clock duty cycle
« on: November 27, 2017, 09:36:04 AM »

Hi

We face a rather strange status on the circuit using FT2232H. We need to use the SPI at 3 MBit/s. By probing the lines with scope, it turn out that the duty cycle of the clock is around 25% and in fact we are not getting the speed that we needed.

Any suggestion?
Logged

FTDI Community

  • Administrator
  • Full Member
  • *****
  • Posts: 190
    • View Profile
Re: SPI mode clock duty cycle
« Reply #1 on: November 27, 2017, 04:55:04 PM »

Have a look at AN_114 - Interfacing FT2232H Hi-Speed Devices To SPI Bus. It provides details on how to interface and configure the FT2232H to read and write data from a host PC to a serial EEPROM over the serial SPI interface bus. It illustrates, via an example, how to use the MPSSE of the FT2232H to interface with the SPI bus and also shows examples of the read and write waveforms on the SPI interface.

Thanks,
FTDI Community
Logged

cioma

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: SPI mode clock duty cycle
« Reply #2 on: January 09, 2018, 11:54:34 AM »

Do you by any chance have 3-phase clocking enabled?
Logged