General Category > Discussion - Software
Programming various devices using FT232H and about drivers
(1/1)
Anshumantech:
Hello,
a) We made a general purpose module of FT232H. For various applications of USB to JTAG, SPI, I2C etc.
b) We could easily program Spartan 3 or Spartan 6 Xilinx FPGA using "xc3sprog" freeware s/w.
c) Now we want to use this module under impact or Quartus (Altera) package to program other 5V devices like CPLD or 50AN or Cyclone 2 or Cyclone 4 etc.
Can you guide about needed driver s/w needed to achieve the above one or all?
Thank you in advance.
FTDI Community:
Hello,
Unfortunately we don't have any experience with impact or Quartus (Altera) package.
These packages require specific hardware to program FPGAs as mentioned in an external forum that you have created:
https://forums.xilinx.com/t5/FPGA-Configuration/Programming-CPLD-XC95108-using-FT232H/m-p/1192066
If no-one else on this FTDI community website can help, it may be worthwhile contacting Altera.
Another community user already replied to one of your posts on this:
“Try UrJTAG”
If you are trying to clone FPGA programmers that’s not something we can support.
The FT232H uses our standard VCP Drivers or D2XX Drivers.
Best Regards,
FTDI Community
Anshumantech:
Hello,
Thanks for your reply.
1) I am using “xc3sprog” with self-made PCB module FT232H for programming devices like Spartan 3, Spartan 6. Also tried for CPLD but error occurs as below. Please help me in this issue.
C:\Users\USER\Desktop\CPLD95108JEDFILE>xc3sprog -c ftdi -v andcpld.jed
Using built-in device list
Using built-in cable list
Cable ftdi type ftdi VID 0x0403 PID 0x6010 dbus data 00 enable 0b cbus data 00 data 00
Could not open FTDI device (using libftdi): device not found
Using FTD2XX, Using JTAG frequency 1.500 MHz from undivided clock
JTAG chainpos: 0 Device IDCODE = 0x29506093 Desc: XC95108
Sorry, can't program Xilinx device 'XC95108' from family 0x4a A more recent release may be able to.
USB transactions: Write 6 read 3 retries 0
2) As you have said use "UrJTAG", I tried it but Altera devices failed to detect.
Please suggest solutions.
Thanks in advance.
FTDI Community:
Hello,
Unfortunately we don't provide support for xc3sprog, or impact/Quartus tools.
You can find the link below for support with this tool:
https://sourceforge.net/projects/xc3sprog/support
Best Regards,
FTDI Community
Navigation
[0] Message Index
Go to full version