FTDI Community

Please login or register.

Login with username, password and session length.
Advanced Search  

News:

Welcome to the FTDI Community!

Please read our Welcome Note

Technical Support enquires
please contact the team @ FTDI Support


New Bridgetek Community is now open

Please note that we have created the Bridgetek Community to discuss all Bridgetek products e.g. EVE, MCU.

Please follow this link and create a new user account to get started.

Bridgetek Community

Author Topic: Trouble on USB with another USB serial device on driver level  (Read 3633 times)

JonnyFischer

  • Newbie
  • *
  • Posts: 3
    • View Profile
Trouble on USB with another USB serial device on driver level
« on: July 19, 2018, 10:11:54 AM »
I do use a FT2232H with the driver from CDM21228_Setup. It is used for a SPI connection to some target.

Next to this I do use an STM32-H405 for a special single wire connection.

Both drivers are installed and always shown as working on driver level in windows device manager.

I did use the STM32-H405 first for a test sequence without any problem. The USB-Description is shown in STMicroelectronics Virtual COM Port -  com6.txt as given by USBTreeView.  I did use the FT2232H Interface with another Windows application for some testing. After usage of this connection, the connection on the other interface via STM32-H405 is broken and locks completely for the application. The USB-Description for the interface is changed to what is shown in STMicroelectronics Virtual COM Port -  com6 - 2.txt.

The USB-Description of USBTreeView for the FT2232H stays nearly the same before and after the run as shown in USB-Verbundgerät -com7,com8.txt and is still usable for another test.
Logged