FTDI Community

Please login or register.

Login with username, password and session length.
Advanced Search  

News:

Welcome to the FTDI Community!

Please read our Welcome Note

Technical Support enquires
please contact the team
@ FTDI Support


New Bridgetek Community is now open

Please note that we have created the Bridgetek Community to discuss all Bridgetek products e.g. EVE, MCU.

Please follow this link and create a new user account to get started.

Bridgetek Community

Author Topic: something about FT232H in 245 FIFO mode  (Read 8660 times)

Adam_L

  • Newbie
  • *
  • Posts: 1
    • View Profile
something about FT232H in 245 FIFO mode
« on: August 31, 2018, 06:46:53 AM »

Im a new guy in the community, Thanks for bigman in there first
I met a problem in the transfer data from FT232 to FPGA by VB6.0. because the VB6.0 can't code the ASCii which is from 128-255 correctly, so the data down to the FPGA is wrong.
The same from FPGA to FT232H, the data from 128-255 can't be read by the VB6.0, So how I can solve the problem?
Logged

FTDI Community

  • Administrator
  • Hero Member
  • *****
  • Posts: 892
    • View Profile
Re: something about FT232H in 245 FIFO mode
« Reply #1 on: September 03, 2018, 04:35:39 PM »

Hello,

Please see some simple Visual Basic examples here:

http://www.ftdichip.com/Support/SoftwareExamples/CodeExamples/VB.htm

We have not encountered this particular issue before, maybe someone else in this community will help if they have seen this issue before.

You may also be interested in TN_167 FTDI FIFO Basics.

Best Regards,
FTDI Community
Logged