FTDI Community
General Category => Discussion - Hardware => Topic started by: cioma on October 24, 2020, 12:02:11 pm
-
Could FTDI please let us know if they are going to release new devices similar to FT232H, FT2232H, FT4232H in the future?
My ideal devices would be:
- High-speed USB
- 1, 2, 4, 8 channel device variants
- UART, MPSSE, bit bang on every channel
- xDBUS[7:0] ports only, no need for xCBUS[7:0] ports
- At least 8 kByte RX FIFO buffer and 8 kByte TX FIFO buffer for each channel
- At least 100 MHz internal clock (vs the current 60 MHz)
- Each port pin shall be independently configurable as open-drain
- Support for all SPI modes
- Support for I2C clock stretching
- Support for I2C multi-master
- Small QFN package with 0.5 mm pin pitch
-
Hello,
We are always looking to improve our products and welcome your feedback, which we have passed onto our R & D teams.
Are you aware of our FT4222H device?
The FT4222H is a High/Full Speed USB2.0-to-Quad SPI/I2C device controller in a compact 32-pin QFN package
Full details on our web site:
https://www.ftdichip.com/Products/ICs/FT4222H.html
best Regards
FTDI Community
-
Thanks for the information.
But what I really interested in is MPSSE engine so FT4222H is not suitable for my needs as I need JTAG, I2C, SPI, Microwire, MDIO interfaces.