706
Discussion - Hardware / Re: FT4232H using MPSSE for I2C on channel B
« on: January 25, 2019, 03:25:05 PM »
Hi,
Could you send your code in as a zip file (re-named to .zi_ ) to us at our support address support1@ftdichip.com. We got port B working on a copy here and so can check your code.
It is also worth checking that you only have one FTDI chip connected as the index values are across all FTDI chips connected. You could try opening by description and appending a B (replace FT4232H Module with your own modules description which can be checked with USBview or FT_Prog).
ftStatus = myFtdiDeviceB.OpenByDescription("FT4232H Module B");
//ftStatus = myFtdiDeviceB.OpenByIndex(1);
Best Regards,
FTDI Community
Could you send your code in as a zip file (re-named to .zi_ ) to us at our support address support1@ftdichip.com. We got port B working on a copy here and so can check your code.
It is also worth checking that you only have one FTDI chip connected as the index values are across all FTDI chips connected. You could try opening by description and appending a B (replace FT4232H Module with your own modules description which can be checked with USBview or FT_Prog).
ftStatus = myFtdiDeviceB.OpenByDescription("FT4232H Module B");
//ftStatus = myFtdiDeviceB.OpenByIndex(1);
Best Regards,
FTDI Community