1
Discussion - Software / Re: Vinculum II bridging UART to a FT232HL/Q
« on: February 16, 2020, 08:30:11 PM »
Thank you. Using the FT90x worked as you described.
As an aside, is there a way to configure the FT90X MCU to accept RS232 instead of TTL/UART? I'm interested in translating 232 signals, but will use a MAX232 chip. However, I've read that some micros can perform this conversion. Thanks.
Jason
As an aside, is there a way to configure the FT90X MCU to accept RS232 instead of TTL/UART? I'm interested in translating 232 signals, but will use a MAX232 chip. However, I've read that some micros can perform this conversion. Thanks.
Jason