Hello,
I have a μFR Classic here and I am trying to work with the "simple" example to see if I can read and write to and from an RFID tag. I am running this on an iMac under OSX 10.14 Mojave.
The connection to the device seems to be fine. I can retrieve info from the device, such as the serial number, description, driver version (1.4.16), etc. using the FTDI functions. But then it gets strange…
I cannot read RFID data from the device. If I put an RFID on the device, the lights begin to blink, indicating that it clearly detects and processes the tag, however all calls to FT_GetStatus() and FT_GetQueueStatus() return nothing but 0s, indicating that no information is available. Not even the UID is being read. I've been fiddling with the baud rate also but it did not make any difference.
In addition, I've been trying to write to an RFID tag. FT_Write returns no error code and tells me it wrote the 16 bytes, however, when I try to read the tag on a different reader, there is nothing on it. It clearly did not actually write anything to the RFID.
Does anyone have an idea what may be going on here?