FTDI Community

General Category => Discussion - Hardware => Topic started by: MS on December 11, 2018, 02:35:20 PM

Title: FT4222: issue with GPIO 2 & 3 simultaneously with I2C in mode 0
Post by: MS on December 11, 2018, 02:35:20 PM
Hi,

I want to use the GPIO2 and GPIO3 simultaneously with the I2C interface in CNFMODE0.

for the configuration of the ports I have used the following procedure:

- initialization of interface A as I2C master
- suspend out deactivated
- wakeup interrupt deactivated
- initialization of interface B for usage of the GPIO

I did not get the GPIO's to work. I2C works fine.
Title: Re: FT4222: issue with GPIO 2 & 3 simultaneously with I2C in mode 0
Post by: FTDI Community on December 13, 2018, 04:30:58 PM
Hello,

Please see our GPIO software examples provided with the library download:

.\LibFT4222-v1.4.2\samples

Unfortunately we don't have any LabVIEW examples for FT4222H.

I would recommend testing out our C programming GPIO example before continuing with LabVIEW.

Please ensure that you are using the latest LibFT4222 version (currently v1.4.2 for Windows).

If you have any further questions, you can contact us on support1@ftdichip.com (support1@ftdichip.com).

Best Regards,
FTDI Community