FTDI Community
General Category => Discussion - Drivers => Topic started by: FTDI Community on October 03, 2017, 10:50:41 AM
-
Window CDM WHQL Certified Driver v.2.12.28 is now available!
This applies to the following Windows OS versions:
Windows 10 (32/64)
Windows 8.1 (32/64)
Windows 8 (32/64)
Windows 7 (32/64)
Windows Server 2016
Windows Server 2012 R2 x64
Windows Server 2008 R2 x64
Download here:
2.12.28 driver files (http://www.ftdichip.com/Drivers/CDM/CDM%20v2.12.28%20WHQL%20Certified.zip)
Setup Executable (http://www.ftdichip.com/Drivers/CDM/CDM21228_Setup.zip)
This driver version is also on Windows Update so should install automatically if you are connected to the internet.
You can also refer to the Installation Guides (http://www.ftdichip.com/Support/Documents/InstallGuides.htm)
If you have any feedback, please let us know.
Thanks,
FTDI Community
-
Dear Admin,
After the upgrade to 2.12.28 version (using under Windows 10 64 bits), my FT232RL became completely erratic... they simply disappear from Device Manager sometimes, causing a disconnection from the hardware.
Please, can you supply the link for an older version? I was using a 2009 version and everything was fine...
Thank you very much,
Marcellus Pereira
-
Hi,
Please follow the steps outlined in the Driver Uninstallation procedure which will remove and reinstall all FTDI drivers from your machine:
FTDI_Driver_Uninstall_with_2-12-28_Install.pdf (ftp://u45902898-ide:Ftd1$erv@ftp.ftdichip.com/CES/Forum/FTDI_Driver_Uninstall_with_2-12-28_Install.pdf)
If you are still having problems after following these steps please can you contact support1@ftdichip.com with full details of your problem and a copy of your schematic so that we may review it, quoting this forum topic.
Thanks,
FTDI Community
-
It´s is working now! Thank you very much! :-)