FTDI Community
General Category => Discussion - Drivers => Topic started by: allenhuffman on September 10, 2019, 04:10:45 PM
-
For FT4222_I2CMaster_Init(), it says:
This parameter is used to configure the FT4222H to be either SM, FB, FM+ or HS mode.
…and in the API docs:
Common I²C bus speeds are the 100 kbit/s standard mode (SM), 400 kbit/s fast mode (FM), 1 Mbit/s Fast mode plus (FM+), and 3.4 Mbit/s High Speed mode (HS)
At which kbps values does it switch to the different modes?
When we use 1000 (kbps), our scope shows it's actually running around 750mhz.