FTDI Community

General Category => Discussion - Hardware => Topic started by: htran on October 31, 2022, 07:24:48 PM

Title: FT601 FIFO Master External Clock
Post by: htran on October 31, 2022, 07:24:48 PM

Hello, I'm using a FT601 with a XC2C256 PLD as the FIFO master and in my current test setup I have the clock generated by the FIFO feeding into the PLD so both have the same clock line. I was wondering if it's possible to have a different clock than the FIFO be used as the clock for the FIFO master (which would be slower) and if possible what considerations should be kept in mind. Thank you in advance!