FTDI Community

Please login or register.

Login with username, password and session length.
Advanced Search  

News:

Welcome to the FTDI Community!

Please read our Welcome Note

Technical Support enquires
please contact the team
@ FTDI Support


New Bridgetek Community is now open

Please note that we have created the Bridgetek Community to discuss all Bridgetek products e.g. EVE, MCU.

Please follow this link and create a new user account to get started.

Bridgetek Community

Author Topic: need to receive data stream from FT602 for non-video purpose  (Read 8358 times)

dbell

  • Newbie
  • *
  • Posts: 3
    • View Profile
need to receive data stream from FT602 for non-video purpose
« on: March 18, 2019, 04:45:42 PM »

We need receive data stream within the UVC from our FT602 to our C#/C++ app on Windows 10.

 Does FT602 have a USB 3 interface for host, or is only UVC available? 

BACKGROUND...
We are using for non-video data stream.
Logged

FTDI Community

  • Administrator
  • Hero Member
  • *****
  • Posts: 892
    • View Profile
Re: need to receive data stream from FT602 for non-video purpose
« Reply #1 on: March 20, 2019, 02:02:41 PM »

Hello,

The FT602 UVC Class SuperSpeed USB Bridge device provides a 32 bit parallel interface to application hardware and a UVC class USB port, allowing captured data to be transferred. The 32-bit parallel FIFO interface is for data streaming and there is a UART interface for control path configuration. Typical applications for the FT602 would be a USB 3.1 Digital Video Camera Interface or USB 3.1 Digital Camera.

Note that we have other SuperSpeed USB 3.0 solutions - The FT600 (16-bit FIFO Bus) and FT601 (32-bit wide parallel FIFO interface) supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.

If you want to send an email to support1@ftdichip.com I can provide some additional information.

Regards,
FTDI Community
Logged