FTDI Community

Please login or register.

Login with username, password and session length.
Advanced Search  

News:

Welcome to the FTDI Community!

Please read our Welcome Note

Technical Support enquires
please contact the team @ FTDI Support


New Bridgetek Community is now open

Please note that we have created the Bridgetek Community to discuss all Bridgetek products e.g. EVE, MCU.

Please follow this link and create a new user account to get started.

Bridgetek Community

Author Topic: FT2232H - PWREN# rising up with no reasons  (Read 9946 times)

marco.bedani

  • Newbie
  • *
  • Posts: 2
    • View Profile
FT2232H - PWREN# rising up with no reasons
« on: February 24, 2022, 08:53:57 AM »
Hi all,
we developed a PCB with a FT2232H chip in 245 FIFO configuration (see attached scheamtic).

Everything is working fine, except for the fact that sometimes, without no apparently reason, we lose USB communication between the PC and our board.
We think that this occurs when the PWRSAV pin goes high.

See attached image from the oscilloscope for the waveforms:
- pink trace is the VBUS on BCBUS7 (pin 59)
- yellow trace is the PWREN# (pin 60)

Any idea for how to solve this kind of issue?
Logged

FTDI Community

  • Administrator
  • Hero Member
  • *****
  • Posts: 896
    • View Profile
Re: FT2232H - PWREN# rising up with no reasons
« Reply #1 on: February 25, 2022, 04:35:58 PM »
Hello,

It sounds like there are hardware issues with your custom PCB.

Details on PWREN#:

Active low power-enable output.
PWREN# = 0: Normal operation.
PWREN# =1: USB SUSPEND mode or device has not been configured.

Please contact your local support office and we can review your schematics:

https://ftdichip.com/technical-support/

We do also have FT2232H based hardware that you can use for test, evaluation and reference.
Scroll down to products found here:

https://ftdichip.com/?s=ft2232h&post_type=product

Best Regards,
FTDI Community
Logged